Reference Guide

Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message CPU <number> has a thermal trip. Check CPU heat sink
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
CPU0002
Message CPU
arg1 has failed the built-in self-test (BIST).
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response Action 1) Turn system off and remove input power for one minute. Re-apply input power and
turn system on. 2) Make sure the processor is seated correctly. 3) If the issue still
persists, contact technical support. Refer to the product documentation to choose a
convenient contact method.
Category System Health
SubCategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
CPU0003
Message CPU
arg1 is stuck in POST.
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response
Action
1) Turn system off and remove input power for one minute. Re-apply input power and
turn system on. 2) Reduce system configuration to minimum memory and remove all PCI
devices. If system completes POST, update system BIOS. Re-install memory and PCI
one component at a time to meet the original configuration. 3) If the issue still persists,
180