Reference Guide

CPU0701
Message CPU
arg1 protocol error detected.
Arguments
–
arg1 =
number
Detailed Description System event log and OS logs may indicate that the exception is external to the
processor.
Recommended Response
Action
1) Check system and operating system logs for exceptions. If no exceptions are found
continue. 2) Turn system off and remove input power for one minute. Re-apply input
power and turn system on. 3) Make sure the processor is seated correctly. 4) If the issue
still persists, contact technical support. Refer to the product documentation to choose a
convenient contact method.
Category System Health
SubCategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message CPU <number> protocol error detected. Power cycle system
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
CPU0702
Message CPU bus parity error detected.
Detailed Description System event log and OS logs may indicate that the exception is external to the
processor.
Recommended Response Action Check system and operating system logs for exceptions. If no exceptions found,
remove input power, reinstall the processor, then apply input power.
Category System Health
SubCategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message CPU bus parity error detected. Power cycle system
Initial Default. LC Log
187