Reference Guide

Detailed Description The Dual In-line Memory Module (DIMM) is malfunctioning. Data loss or data
corruption may occur. The DIMM must be replaced immediately.
Recommended Response Action Replace the DIMM immediately. The DIMM is a part of the controller battery pack.
Refer to your hardware documentation for information on replacing the DIMM.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
Trap/EventID 4329
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
CTL48
Message A foreign configuration was detected on
arg1 .
Arguments
–
arg1 =
controller name
Detailed Description The controller has physical disks that were moved from another controller or have been
removed and replaced on the current configuration.These physical disks contain virtual
disks that were created on the current or other controller.See the storage hardware
documentation for Import Foreign Configuration and Clear Foreign Configuration for
more information.Foreign configuration is seen when a controller is replaced.
Recommended Response
Action
Import or clear the detected foreign configuration using a configuration tool or utility.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
Trap/EventID 4331
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
216