Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
DIS010
Message Auto Discovery LCD display message:
arg1
Arguments
–
arg1 =
progress message
Detailed Description The Auto Discovery process has encountered a problem. One of the following messages will
be displayed on the LCD display and entered in the LC log: 1) No credentials returned, 2)
Blocked Because Admin Account Enabled, 3) Blocked Because IPv6 Enabled, 4) No IP on
NIC, 5) No provisioning server found, 6) Provisioning server is unreachable/invalid address,
7) SSL connection failed no service at IP/port, 8) SSL connection refused, 9) SSL connection
failed (Server authentication), 10) SSL connection failed (client authentication), 11) SSL
connection failed other, 12) SOAP failure, 13) Failed to create account, 14) Blocked Because
Active Directory Enabled, 15) No Service Tag, and 16) Unknown.
Recommended
Response Action
Refer to Lifecycle Controller Remote Services Users Guide for additional information for LCD
messages.
Category Configuration
SubCategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
DIS011
Message Auto Discovery client using customer signed client certificate.
Detailed Description Customer provided client certificate is being used. Auto Discovery client is using this
certificate for the SSL connection with the Provisioning Server.
Recommended Response Action No response action is required.
Category Configuration
SubCategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
243