Reference Guide

15
ENC Event Messages
ENC1
Message An Enclosure Management Module (EMM) was inserted into
arg1 .
Arguments
–
arg1 =
enclosure name
Detailed Description This message is generated after an EMM is inserted into an enclosure.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC10
Message The
arg1 asset name was changed.
Arguments
–
arg1 =
Enclosure Name
Detailed Description You have changed the enclosure asset name. This alert is provided for informational
purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
251