Reference Guide

ENC19
Message The Enclosure Management Module (EMM) has failed in
arg1 .
Arguments
–
arg1 =
Enclosure Name
Detailed Description An Enclosure Management Module (EMM) has failed. The failure may be caused by a
loss of power to the EMM. The EMM self test may also have identified a failure. There
may also be a firmware problem or a multi-bit error.
Recommended Response
Action
Reseat the Enclosure Management Module (EMM). See the storage hardware
documentation for information on replacing the EMM. Replace the EMM. Contact
technical support if the issue persists.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC2
Message An Enclosure Management Module (EMM) was removed from
arg1 .
Arguments
–
arg1 =
Enclosure Name
Detailed Description An Enclosure Management Module (EMM) was removed.
Recommended Response Action Reinsert the Enclosure Management Module (EMM). See the storage hardware
documentation for information on replacing the EMM.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
256