Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC26
Message
arg1 is not responding.
Arguments
–
arg1 =
enclosure name
Detailed Description The enclosure or an enclosure component is in a Failed or Degraded state. It is not
responding to storage management commands or there is a connectivity problem
between the controller and enclosure.
Recommended Response
Action
Verify the health of the enclosure and its components. See the hardware
documentation to for more information. Contact technical support.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC27
Message SAS or SATA mixing of physical disks is not supported within the
arg1 .
Arguments
–
arg1 =
Enclosure Name
Detailed Description The enclosure cannot support both SAS and SATA physical disks. Physical disks
may be disabled. This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
260