Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
ENC28
Message Enclosure Management Module (EMM) firmware version mismatch detected in
arg1 . arg2 arg3 .
Arguments
–
arg1 =
enclosure name
–
arg2 =
EMM 0 version
–
arg3 =
EMM 1 version
Detailed Description The firmware on the EMM modules is not the same version. Both modules must have
the same firmware version. This message is caused when you attempt to insert an
EMM module that has a different firmware version than an existing module.
Recommended Response
Action
Upgrade to the same version of the firmware on both EMM modules.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 2 (Warning)
Trap/EventID 4338
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC29
Message
arg1 temperature has returned to normal.
Arguments
–
arg1 =
Enclosure Name
Detailed Description This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
261