Reference Guide

Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC3
Message
arg1 is shutdown.
Arguments
–
arg1 =
Enclosure Name
Detailed Description The physical disk enclosure is either hotter or cooler than the maximum or minimum
allowable temperature range.
Recommended Response
Action
Check for factors that may cause overheating or excessive cooling. For example, verify
that the enclosure fan is working. You should also check the thermostat settings and
examine whether the enclosure is located near a heat source. Make sure the enclosure
has enough ventilation and that the room temperature is not too hot or too cold. Refer to
the enclosure documentation for more diagnostic information.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC30
Message
arg1 firmware download is in-progress.
Arguments
–
arg1 =
Enclosure Name
Detailed Description This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
262