Reference Guide

Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
ENC31
Message Firmware download on
arg1 has failed.
Arguments
–
arg1 =
Enclosure Name
Detailed Description The system was unable to download firmware to the enclosure. The controller may have
lost communication with the enclosure. There may have been problems with the data
transfer or the download media may be corrupt.
Recommended Response
Action
Attempt to download the enclosure firmware again. If problems continue, verify that the
controller can communicate with the enclosure. Make sure that the enclosure is
powered ON. Refer to the storage hardware documentation for information on checking
the cables.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 2 (Warning)
Trap/EventID 4338
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
ENC32
Message Storage Enclosure Processor (SEP) for
arg1 has been rebooted.
Arguments
–
arg1 =
Enclosure Name
Detailed Description The SEP has been rebooted as part of the firmware download operation and will be
unavailable until the operation completes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
263