Reference Guide

Verify that the controller has the supported driver and firmware versions installed and that
each Enclosure Management Modules (EMMs) are running the same version of supported
firmware.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
ENC7
Message The
arg1 alarm was enabled.
Arguments
–
arg1 =
Enclosure Name
Detailed Description You have enabled the enclosure alarm. This alert is provided for informational
purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
ENC8
Message The
arg1 alarm was disabled.
Arguments
–
arg1 =
Enclosure Name
Detailed Description You have disabled the enclosure alarm.
Recommended Response Action No response action is required.
Category Storage
SubCategory ENC = Storage Enclosr
267