Reference Guide

18
HWC Event Messages
HWC0001
Message Requested operation cannot be completed. No response from iDRAC.
Detailed Description The error is caused due to iDRAC failure. For more information about the failure, see
the Lifecycle Log from iDRAC.
Recommended Response
Action
1.) Turn off the system and disconnect the power cord. 2.) Wait five seconds. 3.)
Reconnect the power cord and turn on the system.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE TRUE FALSE FALSE
HWC0002
Message Cannot complete the operation as the vFlash SD Card is not present. Insert the
vFlash SD card and retry.
Detailed Description This operation cannot be completed because the SD Card media is not present in the
vFlash SD card reader.
Recommended Response
Action
Insert the vFlash SD card or reinsert the vFlash SD card, and retry.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
281