Reference Guide

HWC0003
Message vFlash Initialization is successful.
Detailed Description vFlash SD card media Initialized successfully.
Recommended Response Action No response action is required.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0004
Message Cannot initialize vFlash SD card media.
Detailed Description Cannot initialize vFlash becuase the vFlash SD card is not present, is inserted
incorrectly, is write protected, or is caused by an iDRAC failure.
Recommended Response
Action
Reinsert the vFlash SD card and retry, or replace the vFlash SD card and retry. If the
problem persists, 1.) Turn off the system and disconnect the power cord. 2.) Wait five
seconds. 3.) Reconnect the power cord and turn on the system and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0005
Message Internal error while retrieving updates information in the system.
Detailed Description Internal error. For more information about the failure, see the Lifecycle Log from
iDRAC.
282