Reference Guide

Recommended Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5004
Message A link tuning failure detected on
arg1 .
Arguments
–
arg1 =
name
Detailed Description CMC has old firmware and does not recognize the new device which has requested
link tuning information. After updating the firmware the CMC will recognize the
device.
Recommended Response Action Update the CMC firmware. If the problem persists, contact support.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5006
Message A failure is detected on
arg1 .
Arguments
–
arg1 =
name
Detailed Description None
Recommended Response Action Contact technical support. Refer to your product documentation to choose the
contact method that is convenient for you.
Category System Health
SubCategory HWC = Hardware Config
307