Reference Guide

Arguments
–
arg1 =
number
Detailed Description The fabric type for IOMs on the same chassis fabric must match.
Recommended Response Action Check chassis fabric type in CMC GUI and compare to the type of both IOMs.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5033
Message IO module
arg1 is operating correctly.
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5034
Message A link tuning failure detected on IO module
arg1 .
Arguments
–
arg1 =
number
Detailed Description Link tuning table not supported for this IO modular.
Recommended Response Action Update the CMC firmware. If the problem persists, contact support.
Category System Health
311