Reference Guide

Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC6001
Message The
arg1 controller is online.
Arguments
–
arg1 =
name
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC6002
Message The
arg1 controller is stuck in boot mode.
Arguments
–
arg1 =
name
Detailed Description Information and status from the controller is unavailable.
Recommended Response Action Remove and reapply input power. If problem persists, contact technical support.
Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
313