Reference Guide

20
JCP Event Messages
JCP001
Message Task successfully scheduled.
Detailed Description The UEFI automated task related to the job was successfully scheduled.
Recommended Response Action No response action is required.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP002
Message Could not schedule the job.
Detailed Description The Life Cycle Controller could not schedule the job at this time. This could be due to
an internal error.
Recommended Response
Action
1) Wait for 2-3 minutes and retry the current operation 2) If option 1 did not solve the
issue, restart the iDRAC 3) Run the getallJob command to see a list of the currently
scheduled jobs.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
321