Reference Guide

Detailed Description The method invoked was successful.
Recommended Response Action No response action is required.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP011
Message Invalid parameter value for
arg1
Arguments
–
arg1 =
parameter
Detailed Description The value provided for the specified parameter is invalid and must be corrected for
the invoked method to complete successfully.
Recommended Response Action To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation. Retry the operation requested with corrected
value.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP012
Message The operation failed due to an internal iDRAC error.
Detailed Description The requested operation requires memory or file space allocation. The operation
failed due to lack of memory or file space in the iDRAC.
Recommended Response Action Retry the operation. If the problem continiues, reset iDRAC and retry the operation.
Category Configuration
325