Reference Guide

SubCategory JCP = Job Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP015
Message A running job cannot be deleted.
Detailed Description The job is currently executing and cannot be deleted. The job needs to finish
running, whether successful or not, before it can be deleted.
Recommended Response Action Wait for the job to have a completed job status. Retry the operation.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP016
Message Invalid UntilTime value. A minimum of 12 minutes is required.
Detailed Description The UntilTime input parameter for the job or job queue creation must be at least 12
minutes after the value specified in the StartTime parameter.
Recommended Response Action Set the UntilTime at least 12 minutes after StartTime and retry.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
327