Reference Guide

LC008
Message Unsupported method parameter value.
Detailed Description The parameter value is not supported.
Recommended Response Action Confirm that the parameters provided are correct. For a list of parameters for this
method refer to the Lifecycle Controller User Guide.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC009
Message Insufficient method parameters.
Detailed Description There were insufficient parameters specified for this command.
Recommended Response Action Confirm that the parameters provided are correct. For a list of parameters for this
method refer to the Lifecycle Controller User Guide.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC010
Message Certificate imported successfully.
Detailed Description The communications encryption certificate was imported successfully.
Recommended Response Action No response action is required.
Category Configuration
336