Reference Guide

SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC0100
Message Lifecycle Controller has entered Recovery mode.
Detailed Description A persistent error has occurred while carrying out a Lifecycle Controller operation.
This situation causes Lifecycle Controller to enter Recovery mode. Any remote jobs
pending execution were cancelled.
Recommended Response
Action
To verify or change Recovery mode, use F2 Setup, select iDRAC Configuration, and
select Lifecycle Controller Settings. Updating Lifecycle Controller clears the Recovery
mode.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC0101
Message Lifecycle Controller action was cancelled by a user.
Detailed Description A user cancelled Lifecycle Controller actions. Any remote jobs pending execution
were cancelled.
Recommended Response Action No response action is required.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
337