Reference Guide

LC013
Message A configuration job cannot be created because there are no pending values to
change.
Detailed Description No changes are available between the previous configuration and the current
configuration. At least one attribute should be changed to create a configuration job.
Recommended Response
Action
Change the configuration of one or more attributes before creating a configuration
job.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC014
Message Maximum comment length is 255 characters.
Detailed Description Maximum comment length is 255 characters.
Recommended Response Action Limit the number of characters in the comment to 255 characters.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC015
Message Invalid Part Configuration Update
Detailed Description Invalid current attribute value
Recommended Response Action Check for correct parameter values: (1) Disabled (2) Apply always (3) Apply only if
firmware match
339