Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC035
Message As-Shipped Hardware Inventory Export method is not supported.
Detailed Description This method is not supported in this version of Firmware.
Recommended Response Action Update the iDRAC Firmware to a version that supports this method.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC036
Message Lifecycle Controller is not enabled.
Detailed Description The Lifecycle Controller has been disabled through the iDRAC configuration utility
accessed by pressing CTRL+E on boot up or through a remote command.
Recommended Response
Action
Use the iDRAC configuration utility to enable the Lifecycle Controller by pressing on
the CTRL+E option on boot up at the targeted system.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC037
Message An instance of Lifecycle Controller Log Export is already running.
348