Reference Guide

24
LOG Event Messages
LOG001
Message Missing required InstanceID or JobID parameter.
Detailed Description One or more required parameters needed for the method invoked in the operation
are missing.
Recommended Response Action To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory LOG = Log event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LOG002
Message Invalid parameter value for InstanceID.
Detailed Description The value provided for the specified parameter is invalid.
Recommended Response Action To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory LOG = Log event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
385