Reference Guide

MEM1015
Message Memory device at location
arg1 is in a power active state.
Arguments
–
arg1 =
location
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory MEM = Memory
Severity Severity 3 (Informational)
Trap/EventID 2267
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
MEM1016
Message Memory device at location
arg1 is not installed correctly.
Arguments
–
arg1 =
location
Detailed Description The memory may not be seated correctly, misconfigured, or has failed. Memory size
is reduced.
Recommended Response Action Re-install the memory component. If the problem continues, contact support.
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID 2265
LCD Message Memory <location> is not installed correctly. Re-install
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
407