Reference Guide

NIC023
Message Cannot perform the operation due to an unknown error in iDRAC.
Detailed Description The operation failed to run due to an unknown error in iDRAC.
Recommended Response Action Retry the action. If this fails, reset iDRAC.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC024
Message Set operation failed as the attribute is read only.
Detailed Description The attribute specified in the operation is currently read only and the value cannot
be modified.
Recommended Response Action Verify whether the value can be changed. Refer to the Lifecycle Controller-Remote
Services documentation for the attribute.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC100
Message The NIC
arg1 Port arg2 network link is down.
Arguments
–
arg1 =
Controller
–
arg2 =
Port
426