Reference Guide

Detailed Description The network link is down. Either the network cable is not connected or the network
device is not working.
Recommended Response
Action
Verify that the network port is enabled and if the port has Activity/Speed LEDs, that
they are lit. Check the network cable, network cable connections, and the attached
network switch.
Category System Health
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID 2090
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#OS Log;#LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
NIC500
Message The requested object is not allowed to be configured if DHCP \nis enabled.
Detailed Description The values of IP Address is not allowed to change if DHCP is enabled.
Recommended Response Action Disable DHCP and then modify the value.
Category System Health
SubCategory NIC = NIC Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC501
Message The requested object is not allowed to be configured if Auto Config \nis enabled.
Detailed Description Autoconfig assigns values to the network components.
Recommended Response Action Disable Autoconfig and then modify the value.
Category System Health
SubCategory NIC = NIC Config
Severity Severity 3 (Informational)
427