Reference Guide

OSD11
Message Driver Pack does not have drivers for the selected operating system.
Detailed Description Lifecycle Controller does not have any drivers for the selected operating system.
The operating system installation uses the native drivers present on the operating
system media.
Recommended Response Action No response action is required.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD12
Message Cannot create the USB device needed to copy drivers for the selected operating
system.
Detailed Description iDRAC was unable to create and expose the drivers as a USB device for the OS
installation to proceed.
Recommended Response Action Reset iDRAC and rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD13
Message Cannot mount the USB device needed to copy drivers for the selected operating
system.
436