Reference Guide

Detailed Description iDRAC was unable to mount the drivers as a USB device for the OS installation to
proceed.
Recommended Response Action Reset iDRAC and rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD14
Message Unable to expose the USB device that contains the operating system drivers to host
system.
Detailed Description iDRAC was unable to expose the drivers as a USB device for the OS installation to
proceed.
Recommended Response Action Reset iDRAC and rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD15
Message Mount network share failed - incorrect username or password.
Detailed Description Unable to mount the network share using the credentials specified in the command
because either the username or password is incorrect.
Recommended Response Action Rerun the command with the correct username and password.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
437