Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD22
Message Unable to detach ISO image from the host.
Detailed Description Unable to detach ISO image from the host because either the image is already
detached, or iDRAC may not be operating normally.
Recommended Response Action Reset iDRAC to automatically detach the ISO image.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD23
Message Unable to continue with DetachISOImage - another command is in the process of
exposing the ISO Image and booting to it.
Detailed Description Cannot continue with DetachISOImage because another command is in the process of
exposing the ISO image and booting to it.
Recommended Response
Action
See the ConcreteJob status to make sure that the current running process is complete
and then run DetachISOImage.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
441