Reference Guide

OSD24
Message Unable to continue with DetachDrivers - UnPackAndAttach is in progress.
Detailed Description Unable to continue with DetachDrivers - UnPackAndAttach is in progress.
Recommended Response Action Wait until UnpackAndAttach finishes and then run DetachDrivers. This can take
more than 5 minutes.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD25
Message Unable to detach USB device containing operating system drivers.
Detailed Description Detaching the USB device (that contains drivers for the operating system
installation) from the host has failed. The device may be detached, or iDRAC may not
be operating normally.
Recommended Response Action Reset iDRAC to detach this device automatically.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD26
Message Unable to continue with BootToPXE - another command is running.
Detailed Description Unable to continue with BootToPXE command because another process is using
Lifecycle Controller.
442