Reference Guide

Recommended Response Action See ConcreteJob status to make sure that the running process is complete, and then
run BootToPXE.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD27
Message Copying drivers for selected operating system failed.
Detailed Description Copying drivers for selected operating system failed. The Driver Pack may be
unusable.
Recommended Response Action Update the Driver Pack using USC or DUP and then rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD28
Message Hash verification on the ISO image failed.
Detailed Description Hash verification on the ISO image has failed. The hash value specified in the
command is either incorrect or the ISO image has been changed.
Recommended Response
Action
1) Verify that the hash value specified in the command is correct. 2) Make sure that the
ISO has not been changed 3) Replace the ISO image on the share and rerun the
command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
443