Reference Guide

OSD30
Message Invalid value for ExposeDuration - must be 60 - 65535 seconds
Detailed Description The value specified for ExposeDuration is out of range. It must be between 60 and
65535 seconds
Recommended Response Action Rerun the command with a ExposeDuration value between 60 and 65535 seconds.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD31
Message Copying operating system drivers to network share failed
Detailed Description Copying drivers for the selected operating system to network share failed. The share
may be read-only or the Driver Pack present in Lifecycle Controller may be unusable.
Recommended Response
Action
1) Make sure that the network share has write permission. 2) Update the Driver Pack
using USC or DUP and then rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD32
Message Unable to detach ISO image from the system.
Detailed Description Cannot continue with DetachISOImage because the system does not have an
attached ISO image.
445