Reference Guide

Recommended Response Action The call to DetachISOImage is unnecessary since the ISO image is not currently
attached.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD33
Message Installed BIOS version does not support this method.
Detailed Description The system has an older version of BIOS that does not support this method. Install
the latest version of BIOS to use this method.
Recommended Response Action Update the BIOS to version 1.2 or later and then rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD34
Message Unable to continue with BootToPXE - ISO image is attached to the system.
Detailed Description Unable to continue with BootToPXE command because the system has an ISO
image attached. Detach the ISO image before continuing with BootToPXE.
Recommended Response Action Run the DetachISOImage command and then run BootToPXE.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
446