Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD35
Message Lifecycle Controller is not enabled.
Detailed Description Lifecycle Controller is disabled on the system, so none of the remote operating system
deployment commands will work. Make sure Lifecycle Controller is enabled before
running any command.
Recommended Response
Action
Reboot the system and enable System Services by pressing CTRL+E option when
prompted to do so in the POST. This launches the iDRAC configuration utility where
Lifecycle Controller can be enabled.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD36
Message Boot to ISO Image has been cancelled by using CTRL+E option on the server.
Detailed Description User has cancelled system services by using the CTRL+E option (iDRAC configuration
utility) during POST. This action cancels the WSMAN request to boot to ISO.
Recommended Response
Action
To resolve the issue rerun the command. Do not cancel system services using CTRL+E
during POST when system is rebooting to the ISO.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
447