Reference Guide

OSD37
Message ISO image size too large.
Detailed Description ISO Image size is bigger than the available size in VFlash.
Recommended Response Action 1) Use a smaller size ISO Image. 2) Format the VFlash using the iDRAC GUI,
RACADM, or iDRAC configuration utility and then retry this command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD38
Message Copying the ISO image from the network failed.
Detailed Description There was an error while copying the ISO from the network share.
Recommended Response Action 1) Make sure the network connection is functional. 2) Make sure the Dell VFlash
doesnt have hardware issues by accessing it through the iDRAC GUI.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD39
Message Unable to find the VFlash.
Detailed Description Unable to get VFlash information using the IPMI command.
Recommended Response Action 1) Make sure the Dell VFlash is seated correctly. 2) Make sure a Dell licensed VFlash
card is inserted 3) Make sure the Dell VFlash doesnt have any hardware issues by
accessing it through the iDRAC GUI.
448