Reference Guide

Recommended Response Action Update the Driver Pack using USC or DUP and then run the command again.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD50
Message Lifecycle Controller is in field service mode.
Detailed Description Lifecycle Controller is in field service mode and needs to be updated before
proceeding further.
Recommended Response Action Install the Lifecycle Controller field services package using the iDRAC GUI.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD51
Message Reboot the system to run pending System Services Tasks.
Detailed Description There are pending System Services tasks on the host system that are preventing the
execution of this method.
Recommended Response Action Reboot the host system. The system will automatically enter System Services and
complete the pending tasks.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
454