Reference Guide

PCI3002
Message Failed to program virtual MAC address on a component at bus
arg1 device arg2
function arg3 .
Arguments
–
arg1 =
bus
–
arg2 =
device
–
arg3 =
func
Detailed Description Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of date and does not
support FlexAddress.
Recommended Response Action Update BIOS, BMC/iDRAC, LOM, and mezzanine card firmware. If problem persists
please contact customer support.
Category System Health
SubCategory PCI = PCI Device
Severity Severity 1 (Critical)
Trap/EventID 2417
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PCI3003
Message Virtual MAC address for component at bus
arg1 device arg2 function arg3 was
successfully programed.
Arguments
–
arg1 =
bus
–
arg2 =
device
–
arg3 =
func
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory PCI = PCI Device
Severity Severity 3 (Informational)
Trap/EventID 2419
LCD Message No LCD message display defined.
485