Reference Guide

31
PR Event Messages
PR1
Message A replacement part was detected for device:
arg1
Arguments
–
arg1 =
device name
Detailed Description The specified device has been replaced.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR10
Message Firmware update will not be performed. Firmware package is not present for
arg1
Arguments
–
arg1 =
device name
Detailed Description The Part Replacement feature has deteced a firmware difference and would apply
firmware based on user settings for the system. However, the previous devices
firmware update package is not present on the Lifecycle Controller.
Recommended Response
Action
Use Unified Server Configurator or Dell update package to update device.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
495