Reference Guide

PR13
Message Firmware mismatch detected. Configuration changes not applied.
Detailed Description The Part Replacement feature deteced a firmware difference and cannot apply the
configuration changes. After the device firmware is updated, configuration changes
can be applied.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR14
Message The configuration could not be applied to device:
arg1
Arguments
–
arg1 =
device name
Detailed Description The device could not apply the configuration settings. This may indicate
configuration changes since the last system inventory.
Recommended Response Action Check the current system configuration and retry the operation.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR15
Message Unable to verify configuration changes for device:
arg1
497