Reference Guide

Arguments
–
arg1 =
device name
Detailed Description The configuration changes requested have not passed the device specific
verification check and will not be applied.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR16
Message Some of the configuration values could not be applied to device:
arg1
Arguments
–
arg1 =
device name
Detailed Description The device could not apply some of the configuration settings. This may indicate
configuration changes since the last system inventory or mutually exclusive settings.
Recommended Response
Action
Check the current system configuration and ensure all settings are correct. If not,
retry the operation.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR17
Message Some of the configuration values stored for the previous device could not be applied to
device:
arg1
Arguments
–
arg1 =
device name
498