Reference Guide

Detailed Description Some of the configuration values stored for the previous device could not be applied to
the current device. This may be due to firmware version or other differences in the
part.
Recommended Response
Action
Check the devices configuration and ensure that the new configuration is correct for
the system.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR18
Message Firmware version difference detected for device:
arg1
Arguments
–
arg1 =
device name
Detailed Description The Part Replacement feature has detected a firmware difference between the
current and previous components. Depending on the Part Firmware Update setting
value this may cause a firmware update to the replaced part.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR19
Message Job completed successfully.
Detailed Description The specified job has completed successfully.
Recommended Response Action No response action is required.
Category Configuration
499