Reference Guide

PR28
Message Unable to locate device in current configuration.
Detailed Description The device that the job was intended for is no longer detected. This could be due to
the device being removed, disabled, or a failure.
Recommended Response
Action
If the device was removed, reinsert the device and retry the operation. If the device
was disabled, reenable the device and retry the operation.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR29
Message Unable to locate device in previous configuration.
Detailed Description The device that the job was intended for has no previous information recorded. The
request has failed as this information is required to initiate the operation. This has
been deprecated.
Recommended Response
Action
Enable the Collect System Inventory on Restart attribute of the Lifecycle Controller and
restart the system. Alternatively, use the Unified Server Configurator utility.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR3
Message Newer version of firmware found on device:
arg1
Arguments
–
arg1 =
device name
504