Reference Guide

PR34
Message
arg1 failed after exceeding retry attempt limit.
Arguments
–
arg1 =
Job ID
Detailed Description The job was attempted but failed unexpectedly. An AC Power loss, system crash, or
other interruption during the jobprocessing can cause this failure..
Recommended Response Action Recreate and resubmit the job.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log;#None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR35
Message Power Supply slot
arg1 firmware update will be performed during next system
reboot.
Arguments
–
arg1 =
PS slot number
Detailed Description The Part Replacement feature has detected a firmware difference for the power
supply and will start the firmware update process upon system reboot.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
507