Reference Guide

PR5
Message The configuration values stored for the previous device could not be applied to device:
arg1
Arguments
–
arg1 =
device name
Detailed Description Some or all configuration values stored for the previous device could not be applied to
the current device. This may be due to firmware version or other differences in the
part.
Recommended Response
Action
Check the devices configuration and ensure that the new configuration is correct for
the system.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR6
Message Configuration changes successfully applied to device:
arg1
Arguments
–
arg1 =
device name
Detailed Description The configuration values stored for the previous device were applied to the current
device.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
509