Reference Guide

PR7
Message New device detected:
arg1
Arguments
–
arg1 =
device name
Detailed Description The specified device was added to the system.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR8
Message Device not detected:
arg1
Arguments
–
arg1 =
device name
Detailed Description The indicated device has been removed from the system, is no longer functioning, or
has been disabled.
Recommended Response
Action
If the part is present, make sure it is properly installed. Ensure that the device has not
been disabled in the system BIOS or other configuration utility. Contact technical
support if the device is still non functional.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
510