Reference Guide

Detailed Description Insufficient power in chassis to power on blade.
Recommended Response Action Utilize the Chassis Management Controller web interface to check available power
and blade power requirements. If sufficient power is available, retry the operation.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0900
Message Power unit
arg1 is off.
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0901
Message Power unit
arg1 is on.
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory PSU = Power Supply
539