Reference Guide

PSU0908
Message Power lost on power unit
arg1 .
Arguments
–
arg1 =
number
Detailed Description The power supply is installed correctly but an input source is not connected or is not
functional.
Recommended Response Action Verify the input source is attached to the power supply. Verify the input power is
within the operating requirements for the power supply.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0909
Message Power restored on power unit
arg1 .
Arguments
–
arg1 =
number
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0910
Message Soft power control failure detected on power unit
arg1 .
542