Reference Guide

SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0100
Message The Smart Card is removed. Further communication is not possible.
Detailed Description Communication with the Smart Card has been lost.
Recommended Response Action Insert a valid Smart Card and try again.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0101
Message The inserted Smart Card is not valid or the Smart Card reader is not supported.
Detailed Description The data returned is not in a known format.
Recommended Response
Action
This error may occur because: 1. Smart Card is invalid. Insert a valid Smart Card and try
again. 2. Check connection between reader and system. 3. There may be an issue with
the Smart Card reader. Try reinstalling the reader driver or use a different reader.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
575