Reference Guide

Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0107
Message The inserted Smart Card cannot be recognized. Ensure that the correct Smart Card CSP
drivers are installed.
Detailed Description Communication with the Smart Card reader is established and a Smart Card is inserted, but
there are problems accessing the Smart Card. The appropriate Cryptographic Service
Provider (CSP) drivers are not installed.
Recommended Response
Action
There may be an issue with the Smart Card Cryptographic Service Provider (CSP) drivers.
Use the client OS to install CSP driver. If the OS has problem with Smart Card, then there
will have problem using the Smart Card. So make sure Smart Card can login with Windows
OS.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0108
Message An internal error is encountered. Insert a valid Smart Card and try again. (Does this
and preceeding messages show up in the SEL?)
Detailed Description A non-specific error is detected when accessing the Smart Card.
Recommended Response Action Review the error message preceeding or following this message.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
578